Swann QSGINTCAMVER5 Guide De Démarrage Rapide page 6

Because the camera is completely wire-free, you'll have a lot of
flexibility with where you place it. The camera's flat base allows
you to put it on a table, shelf, or anywhere with a flat surface.
The camera also comes with a separate magnetic stand which
can be mounted to a wall with either the included 3M Command™
adhesive strips or screws. The stand will hold the camera in place
at almost any angle.
Mounting with adhesive strips
The supplied double-sided adhesive strips work best on smooth
surfaces. When applying the strips, press firmly for at least 30
seconds to achieve a stronger adhesive bond.
Mounting with screws
Use the supplied mounting template to correctly mark and drill
screw holes. Then install screws (and wall plugs, if necessary)
and hang the magnetic stand over the screw heads.
6
English
English
CAMERA PLACEMENT