Specifications - Alpine CDE-9870 Mode D'emploi

Specifications

FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
AM TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
CD PLAYER SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
PICKUP
Wave length
Laser power
GENERAL
Power Requirement
Power Output
* Primary amplifier ratings per CEA-2006 Standard
• Power output: measured at 4 Ohms and
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
Maximum Pre-Output Voltage
Bass
Treble
Weight
CHASSIS SIZE
Width
Height
Depth
NOSEPIECE SIZE
Width
Height
Depth
• Due to continuous product improvement, specifications and design
are subject to change without notice.
87.7-107.9 MHz
9.3 dBf (0.8 µV/75 ohms)
13.5 dBf (1.3 µV/75 ohms)
80 dB
65 dB
35 dB
2.0 dB
530-1,710 kHz
22.5 µV/27 dB
5-20,000 Hz (±1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
85 dB (at 1 kHz)
795 nm
CLASS I
14.4 V DC
(11-16 V allowable)
16 W RMS × 4*
1% THD+N
2 V/10 k ohms
±14 dB at 100 Hz
±14 dB at 10 kHz
1.6 kg (3 lbs. 8 oz)
178 mm (7")
50 mm (2")
161 mm (6-3/8")
170 mm (6-3/4")
46 mm (1-13/16")
18 mm (11/16")
21
-EN