OLEO ELEVATOR LB 50 Guide D'installation page 5

Name plate, designation, identification
2.0 The Data Plate explained
The data plate is a requirement for all elevator buffers to comply with the various code authorities around the world. The
data plate must display the following information about the buffer: Buffer Name, Stroke, Safety Codes to which the buffer
conforms, Max. Strike Speed, Mass Impact Load, Min Impact Load, Year and Month of Manufacture, Oil Specification and in
the case of gas being used a Gas Specification.
Various information is required from authorities worldwide but Oleo has limited this to produce the most standard data
plate possible.
Figure 1 highlights the requirements for the data plate.
SAFETY CODE
STRIKING SPEED MAX.
Buffer
Performance
MASS LOAD MIN.
Data
MASS LOAD MAX.
YEAR OF MANUFACTURE
GB CERTIFICATION NO.
GAS COMPOSITION:
Gas Data
99% NITROGEN 1% INERT TRACER - SF6
OIL SPECIFICATIONS:
VISCOSITY INDEX 75 MINIMUM
VISCOSITY 280/350 SSU AT 100ºF (38ºC)
Oil
OR ISO VG68 (68mm²/s AT 40ºC) (EN81.1)
Specification
POUR POINT 0ºF (-18ºC) MAXIMUM
S.G. 0.88 TO 0.90 AT 60ºF (15ºC)
(DENSITY AT 15ºC 0.88 TO 0.90Kg / litre)
AS CODES: SHELL TELLUS 68
NETEC
NY MEA 54-08-M
CA 4648
MADE IN UNITED KINGDOM
Manufacturing
Origin
COVENTRY
ENGLAND
A17.1 GB 7588
2.07
m/s
450 kg
45435
kg
2014.10
TX-F330-014-13-0065
OLEO INTERNATIONAL
GROVELANDS, LONGFORD ROAD, EXHALL, COVENTRY, CV7 9NE, ENGLAND
"Made in United Kingdom" and manufactured
address require for many Customs
Figure 1 Data Plate explained
Buffer
Type
Stroke
BUFFER TYPE STROKE
SEB18.2 219 / 8.62
CSA JIS/JEAS
407
992
10020
SERIAL NO. S0123456789
SW0302-0602
LR 81519
BSI-LB-002
B44-10 / ASME
0086
A17.1-2010
OLEO INTERNATIONAL
(mm / in.)
Safety Codes
the Buffer
EN81.1
conforms to
fpm
lb
Oleo Serial
lb
Number and
Year of
Manufacture
Certification
Numbers and
Marks
4