Hydraulic System - Sinmag Europe SpiraloXL Mode D'emploi

11. REMARK:
1. Move the head of the machine up and down at least one time before daily use.
2. Do not operate the machine when the bowl is not located well.
3. Do not move the bowl when the head moves up and down.
4. Trolley should be pushed into the mixer steadily, neither too slow nor too fast. If you find
it difficult to push trolley, move the trolley backward. Adjust the track, and push it into the
machine again.
5. The bowl should remain in its original position before finishing daily work, don't push it out.

12. HYDRAULIC SYSTEM

1. Start the machine and hydraulic system.
Turn on the power press "UP" or "DOWN" button, the motor will run and the hydraulic
system starts to work.
2. Head up
Press "UP" button, the cylinder moves upward to push the mixer head to upper position.
3. Head down
Press "DOWN" button, the cylinder moves downward to push the mixer head to mixing
position.
ENG
25