C. FIRST START UP(-S) AFTER INSTALLATION
Familiarise yourself with the installation manual and the operating manual first.
Refer to chapter "first start up" in the operating manual
Make sure to properly ventilate the room.
D MAINTENANCE
Periodically cleaning the stove is important for safety, efficient operation and -at
the same time- increasing the life time of the stove.
Do not use steel wool, hydrogen chloride or other corrosive, aggressive or scrat-
ching products to clean neither the internal nor the external surface of the stove.
D.1 MAINTENANCE TO BE DONE BY THE (END-) USER:
Refer to relevant chapter in operation manual
D.2 MAINTENANCE TO BE DONE BY AUTHORIZED TECHNICIAN
Task
professional inspection and maintenan-
ce of stove (& flue system)
cleaning/sweeping
system
replacing parts not mentioned in this
manual
connection of the stove to the chimney/
flue
all other maintenance not specifically
4
mentioned in this manual.
62
The external thermostat connection must stay potential free, never connect
these points to mains.
Before starting executing maintenance or cleaning make sure the fire has
extinguished completely and that any hot surfaces are cooled down suf-
ficiently.
• Failing to observe the maintenance procedures can result in personal
injuries, operating malfunctions and irreparable damage to the stove and
building.
• The flue/chimney must be kept clean at all times as soot deposits or not
burnt residues may reduce its opening. Culmination of soot deposits or
residues might even catch fire leading to dangerous situations.
the
chimney/flue
Frequency (*)
Twice per season, first time at begin-
ning of season
Twice per season, first time at begin-
ning of season
Upon signalling damages
Twice per season, first time at begin-
ning of season
Once per season, first time at beginning
of season