Ryobi GD200 Manuel D'utilisation page 34

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INSTALLING THE OUTDOOR KEYPAD
See Figures 61 - 63.
 Locate the following items:
Outdoor Keypad
Screws (1 in., Phillips Hd.) [2]
Drywall Anchors (2)
WARNING:
Do not use garage door opener if keypads or remotes
do not start and stop the motor. An opener that cannot
be controlled with a keypad or remote is dangerous,
can result in death or serious personal injury, and must
be repaired.
WARNING:
Make sure the keypad is mounted high enough to prevent
unauthorized activation of the garage door opener. It
should be placed at least five feet above the floor so that
it is inaccessible to children. Unauthorized activation of
the opener can result in death or serious personal injury.
WARNING:
Do not start or stop the garage door opener if there is a
person or object in the path of the door, the door has not
been properly balanced, or if you cannot see the doorway.
Failure to follow these instructions can result in death or
serious personal injury.
NOTE: For convenience, we recommend you program the
outdoor keypad before installing. See Programming the
Outdoor Keypad in the Operations section.
 Find desired location outdoors and in sight of the garage
door.
NOTE: The keypad should be at least five feet above the
floor so it is inaccessible to children.
 Use a pencil to mark screw hole placement and install
top screw.
NOTE: Use screws and drywall anchors when installing
the keypad into drywall.
 Place the wide portion of the key hole over the head of
the top screw.
 Slide the keypad down until the top screw is inside the
narrow portion of the key hole.
 Remove the battery cover and 9-volt battery.
 Use a level to be sure the keypad is in a vertical position,
then install bottom screw into the screw hole.
INSTALLATION
 Install 9-volt battery.
 Replace battery cover.
 For programming instructions, see Programming the
Outdoor Keypad in the Operations section.
34 - English
Outdoor
Pencil
Keypad
Key
Hole
Screwdriver
Bottom
Battery
Screw
Cover
Battery
Top
Screw
Fig. 61
Screw
Hole
Fig. 62
Fig. 63

Publicité

Table des Matières
loading

Produits Connexes pour Ryobi GD200

Table des Matières