Specifications; Location - Proficook PC-WC1046 Mode D'emploi

Specifications

Model No.
Bottle capacity
Net capacity
Energy consumption / 24h
Energy consumption / year
Climate class
Noise level
Type
Power supply
Input power
Fuse protection
Light, LED
Dimensions H x W x D
Net weight
(1)
The actual energy consumption depends on the use and installation of the device.
All device-specific energy data have been determined by the manufacturer under
laboratory conditions in accordance with pan-European standardized measuring
methods. These are regulated by EN ISO 15502. The actual energy consumption de-
pends on the usage and might therefore also be above the values determined by the
manufacturer under standard conditions.
An expert knows these relations and will execute the tests with special measurement
instruments in accordance with the regulations in place.
MANUFACTURER DATA
Product is subject to changes and improvements.
i
nstallatiOn

Location

Sufficient ventilation around the device is necessary in order for the heat to dissipate
properly and to guarantee efficient cooling operation at low power consumption. For
this purpose, leave sufficient space around the device.
• Minimum clearance of 5 cm between rear side and wall,
• at least 20 cm on both sides and on the top of the device.
• Leave proper space in front of the device in order to open the door at an angle of
120°.
IMPORTANT
• Do not expose the device to direct sunlight.
• Do not place near heaters, next to a stove or any other heat sources.
• Do not use the device outdoors.
PC-WC 1046
8 à 0,75 l
23 l
(1)
0.284 kWh
104.0 kWh
N (+16°C up to +32°C)
35 dB(A) re 1 pW
Free-standing
220-240 V, 50 Hz
70 W
1 A
1 W
28.0 x 42.0 x 48.0 cm
8.8 kg
74