Ce-Statement - EUROM EK5001 Manuel D'utilisation

remove the plug from the socket and allow the heater to cool down before cleaning
or carrying out maintenance work..
Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do

not use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or
chemical solutions!
Use a vacuum cleaner or compressor to carefully remove any dust and dirt from

the grills and ensure that the air intake and outlet openings are clean. Be
careful not to touch or damage any internal parts during cleaning!
The heater contains no other parts which need maintenance.

At the end of the season, store the cleaned heater in the original packaging if

possible. Store upright in a cool, dry and dust-free place.
Removal

CE-statement

Eurom - Genemuiden-NL hereby declares that the EUROM workspace heaters,
type EK5001 – EK9002 – EK15002, comply with the LVD guideline 2014/35/EU
and the EMC guideline 2014/30/EU and meet the following standards:
EN 60335-1:2012+AC:2014+A11:2014 EN 55014-1:2006+A1:2009+A2:2011
EN 60335-2-30:2009+A11:2012
EN 62233:2008
RoHS 2011/65/EU&2015/863/EU
Genemuiden, 06-05-2019
W.J. Bakker, alg. dir.
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment
contains valuable materials, suitable for recycling. These
materials should be made suitable for reuse in order to prevent
any adverse effects to health and the environment caused by
unregulated waste collection. Therefore, please make sure that
you bring old equipment to a designated collection point.
Alternatively, contact the original supplier, who can make sure
that as many of the components as possible can be recycled.
EN 55014-2 :2015
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 61000-3-11:2000
EN 61000-3-12:2011
34