Thrustmaster Ferrari Challenge wheel Manuel De L'utilisateur page 7

• Erasing your programming:
Press and hold down for 2 seconds: SE + ST (6).
CONFIGURING THE PEDAL SET
By default, your wheel's gas and brake pedals function in Separate mode, meaning that the
pedals function on independent axes.
This mode allows you to considerably improve your driving precision.
If your game does not support Separate mode, your wheel's pedal set will not function
properly. You will then have to switch to Combined mode.
• Pedal set mode changing procedure:
Simultaneously press and release: the 2 pedals + the PS button (4).
(This procedure must be carried out following every restart or disconnection of your wheel)
SEPARATE (default mode: recommended)
• Setup of pedals on PLAYSTATION®3:
Separate pedals
(default mode)
- Gas = R2 trigger
on the PS3 controller
- Brake = L2 trigger
on the PS3 controller
Action
Your programming has now been erased.
PEDAL SET MODE
COMBINED
Combined pedals
(must be selected)
- Gas = Up direction on the PS3
controller's right mini-stick
- Brake = Down direction on the PS3
controller's right mini-stick
6/10
LED (5)
TURNS OFF AND
THEN COMES BACK
ON AGAIN
LED (5)
RED
GREEN