Startup And Settings; Display; System Startup - Hot Splash HS25 Mode D'emploi

6. Startup and settings

6.1. Display

1. ON/OFF
4. Settings LED
7. Fan LED
6.2. System startup (pool circulation pump & heat pump).
STEP1 (Start)
Turn on the pool circulation pump (not included). Check for possible water
leaks and for good water flow to and from the swimming pool.
STEP2 (Start)
Push the green reset button on the RCD of the heat pump. The Power LED(2)
will turn on, indicating the heat pump is ready to start.
Outdoor socket
2. Power LED
5. Increase set temperature or
current water temperature
8. Operation LED
English
3. Settings
6. Decrease set temperature
or current air temperature
inside the heat pump
9. Pool water temperature
9