Hot Splash HS25 Mode D'emploi page 11

STEP6 (Set)
Push the Set button(3) to define the temperature. The set LED(4) indicates you are in
the settings menu. This menu will close and save any changes automatically after 5
seconds.
Push the upwards button(5) and downwards button(6) to set the desired
temperature.
The settings menu only works when the heat pump is active.
STEP7 (Stop)
Push the ON/OFF button(1) to stop the heat pump.
The heat pump shuts down but the fan keeps on turning for 60 seconds to
cool down.
+
English
-
11