Programming intouch on the induction hob
L
ATTENTION: First program the remote control on the hood.
Connect the plate to the mains supply.
1. Press the
and
until you hear a longer, 2nd "beeb" signal.
• Now wait until the lighting in the extraction hood starts to blink OR you hear a
"click" from the hood.
2. Press
immediately while the lights are flashing or during the "click" sound.
You will hear a "beep" signal to confirm the link between the two devices.
You can now operate the extraction hood with the control keys on the induction hob.
Locking intouch on the induction hob
The InTouch controller on the induction hob can be locked for 15 seconds; for ex-
ample, to clean the hob glass.
1. Press the
and
until you hear a "beeb" signal.
• The InTouch controller on the induction hob will now be locked for 15 seconds
and you will hear a "beep" signal during this time.
• The InTouch controller can then be used as normal.
keys on the induction hob at the same time for 7 seconds
keys on the induction hob at the same time for 2 seconds
– 10 –