Sony Cyber-shot DSC-RX100M2 Mode D'emploi page 27

HDMI Resolution
CTRL FOR HDMI
USB Connection
USB LUN Setting
USB Power Supply
Audio signals
WPS Push
Access Point
Settings
Edit Device Name
Disp MAC Address
SSID/PW Reset
Airplane Mode
Version
Language
Drop Sensor
Demo Mode
Initialize
*1
Appears when an Eye-Fi card (sold separately) is inserted into the camera.
Sets the resolution when the camera is connected to an
HDMI TV.
Operates the camera from a TV that supports
"BRAVIA" Sync.
Sets the USB connection method.
Enhances compatibility by limiting the functions of USB
connection.
Sets whether to supply power using a USB connection.
Sets the operating sound of the camera.
You can register the access point to the camera easily by
pushing the WPS button.
You can register your access point manually.
You can change the device name under Wi-Fi Direct,
etc.
Displays the MAC address of the camera.
Resets the SSID and password of smartphone
connection.
You can set this device to not perform wireless
communications.
Displays the camera software version.
Selects the language.
Sets the [Drop Sensor] function.
Sets demonstration playback of a movie to on or off.
Restores settings to their defaults.
GB
GB
27