Olympus S-DVD-100 Manuel D'utilisateur page 43

Dock&Done mode
Problem
The Dock&Done The unit is not turned on.
menu does not
appear on the LCD
The digital camera is not properly
of the digital camera
connected to the unit.
after connecting to
The unit is in PC mode.
the unit.
"STORE ONLY" Newly taken image file is not in the digital
cannot be selected camera.
from the
An incompatible, un-finalized, or un-
Dock&Done menu
writeable disk has been inserted.
on the LCD of the
"NOT STORE" is selected on the first
digital camera.
screen appearing when the digital camera
is docked after a blank disk is inserted.
"PRINT ORDER" Print order information is not set.
cannot be selected
from the
Dock&Done menu
on the LCD of the
The printer is not connected, or the power
digital camera.
of the printer is not on.
The printer is not Dock&Done
compatible.
"SEL. PRINT" The printer is not connected, or the power
cannot be selected of the printer is not on.
from the
The printer is not Dock&Done
Dock&Done menu
compatible.
on the digital
camera.
Cause/Status
Troubleshooting
Solution
Switch the unit on and make sure that
the power indicator turns on.
Turn the unit off, then back on, before
connecting the digital camera.
Set the Dock&Done mode/PC mode
switch to the Dock&Done mode and
make sure that the Dock&Done mode
indicator turns on.
After taking new pictures, dock the
digital camera back on the cradle.
Replace the disk with a compatible one
for storing.
Select "FORMAT DISK" on the first
screen.
Check to see if a print order
information has been set. If not, set the
print order information and connect the
digital camera to the unit again.
Check to see if the printer is properly
connected and turned on.
Connect a Dock&Done-compatible
printer.
Check to see if the printer is properly
connected and turned on.
Connect a Dock&Done-compatible
printer.
EN-43