Olympus S-DVD-100 Manuel D'utilisateur page 25

3
Wait until the ACCESS indicator (blue) goes off, then dock the digital camera onto
the cradle.
The menu screen will be displayed in the digital camera LCD monitor.
Tip
You can charge a battery of a Dock&Done-compatible digital camera even while the power is turned off.
4
Select the desired store option on the digital camera.
1 ) If a blank disk is inserted, select whether to format or print only.
To format, select "FORMAT DISK" with the a button and press the 9 button. When the "YES"/
"NO" selection screen appears, selecting "YES" and pressing the 9 button starts formatting
(Formatting will take some time depending on the type of disks). After formatting is complete, the
"Dock&Done" menu screen appears.
To conduct printing only, select "NOT STORE" and press the 9 button. The "Dock&Done" menu
screen will appear in the digital camera LCD monitor.
If a disk has not been inserted in the unit, or if an incompatible or incompatibly-formatted disk has
been inserted, a message appears for 3 seconds before the "Dock&Done" menu screen appears. In
this case, although saving cannot be conducted, printing will be possible.
2 ) Select the desired store setting using the digital camera's a/c buttons. The items displayed in the
"Dock&Done" menu screen will differ depending on the model of the digital camera or its settings
and reservation conditions.
DOCK MODE
STORE PRINT ORDER
STORE ONLY
STORE SEL. PRINT
EXIT
20SEC. TILL AUTO STORE
9 button
a c buttons
mode
EN-25