Olympus S-DVD-100 Manuel D'utilisateur page 19

Number Name
A
Docking connector
cover
B
Docking connector
C
PUSH button
D
Dock&Done mode/PC
mode indicator
E
Power indicator
F
Dock&Done mode/PC
mode switch
G
ACCESS indicator
H
Manual eject hole
I
Eject button
J
Tray
K
printer port ( Q )
L
USB (mini B) port
( )
M
Extension port (EXT.)*
N
DC input port
O
Power switch (I/O)*
1
* Dock&Done cable KP16 is sold separately.
2
* When a USB device is connected to this port, the PC recognizes the device in PC mode. Note however, that you cannot use
VBUS-based devices because the power supply via VBUS is not supported (Not functional in Dock&Done mode).
3
* You can charge a Dock&Done-compatible digital camera even if the power of the unit is turned off.
Under this cover, is a connector for a Dock&Done-compatible digital
camera.
Used for connection with a digital camera.
Opens the docking connector cover.
Indicates which mode (Dock&Done or PC) the unit is in.
Lights in green when the power to the unit is on.
Switches between Dock&Done and PC mode according to the
purpose of use.
Flashes in blue while data is being stored or flashes in red when an
error has occurred.
This hole is used in case of malfunction when the tray will not eject.
Ejects the tray. (There are cases when the tray will not eject when the
button is pressed during software operation.)
The tray where a disk is set.
Used for connection with a Dock&Done-compatible printer via the
1
dedicated cable* .
Used for connection with a PC via the USB cable.
2
When another Dock&Done-compatible storage is connected in PC
mode, the device can be operated from your PC.
Using with the compatible hard disk storage, you can copy the data
economically via your PC.
Used to connect the AC adapter.
3
Turns on/off the power to the unit.
Parts and controls
Function
EN-19