Olympus S-DVD-100 Manuel D'utilisateur page 28

Stockage sur dvd
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

mode
4
Wait until the ACCESS indicator (blue) goes off, then dock the digital camera on the
cradle.
Formatting of the blank disk will commence. After formatting is complete, image file copying and disk
finalizing will automatically be conducted. After share disk creation ends, the digital camera's LCD
monitor will revert to the mode menu.
If a disk has not been inserted in the unit, or if an incompatible disk or a disk other than a blank disk has
been inserted, an error message will appear. After removing the digital camera from the cradle and
pressing the b button to return to the mode menu, insert a blank disk compatible with the unit, and repeat
from step 2.
Tip
9
Press the
button on the camera to cancel formatting or copying of the share disk. When the "RESTART" /
"CANCEL" selection screen appears, select "CANCEL" and press the
canceled and the digital camera will return to the mode menu.
Notes
• Do not switch to the PC mode while the unit is processing in the Dock&Done mode. The unit does not switch from
PC mode to Dock&Done mode until the unit is writing the data ends.
• Do not turn off the unit, or disconnect its cable while the ACCESS indicator (blue) is blinking, otherwise a store or
print error may result. The status of storing/printing or error messages are displayed on the LCD screen of the
camera (g page 40).
• Do not remove the camera while the ACCESS indicator (blue) is blinking. In this case, operate from the camera to
cancel the process before removing it from the cradle.
EN-28
9
button. Formatting or copying will be

Publicité

Table des Matières
loading

Table des Matières