Information On Maintenance - REMIS REMIfront IV-D Mode D'emploi

B2
Usage side system
B3
B4
B5
D. Information on maintenance
1. Care:
2. Maintenance/repair:
3. Storage of documentation:
4. Obtaining replacement parts:
B3+B4:
Closing:
Release handle by pushing and pulling slightly from its re-
sting position. Pull the handle to the catch, the magnetic
catch will lock automatically.
B5:
Opening:
Pull handle to catch. Lock the handle in place by pushing
on the frame.
Always ensure that both sides are
CAUTION!!!
locked in place prior to commen-
cing travel!
Avoid using aggressive cleaning agents (solvents/abrasi-
ves). Clean the frame elements of the front and side sys-
tems with a damp cloth and mild soap solution. Clean the
folding material carefully with a soft brush or damp cloth.
The system is designed to not require any maintenance.
The documentation with the operating and installation in-
structions should be stored within the vehicle in case it is
needed.
You can obtain replacement parts from your specialist dea-
ler.
US/GB
7/20