Audio Settings - Kenwood DPX302U Mode D'emploi

SiriusXM® Radio
TUNE START * 2
ON: All qualified music channels in the SmartFavorite
will start playback from the beginning of the song. ;
OFF: Cancels.
SIGNAL LEVEL NO SIGNAL/ WEAK/ GOOD/ STRONG: Shows the
strength of the current received signal.
BUFFER USAGE 0% — 100% (0): Shows the memory usage for
Replay buffer.
SXM RESET YES: Resets stored channel and lock setting to
default. ; NO: Cancels.
* 1
Displayed only when [USER DEFINED] is selected.
* 2
Available only if the connected SiriusXM Vehicle Tuner is SXV200 or later that
supports SmartFavorites.

AUDIO SETTINGS

While listening to any source...
1
Press to enter [AUDIO CONTROL] directly.
2
Turn the volume knob to select an item (see the following table), then press
the knob.
3 2
Repeat step until the desired item is selected or activated.
4 Press and hold to exit.
(or using RC-406)
1 Press AUD to enter [AUDIO CONTROL].
Press J / K to select an item, then press
2
To return to the previous setting item, press
SUB-W LEVEL –15 to +15 (0)
BASS LEVEL –8 to +8 (+2)
MID LEVEL –8 to +8 (+1)
TRE LEVEL –8 to +8 (+1)
EQ PRO (This setting is stored to [USER].)
BASS ADJUST BASS CTR FRQ
BASS LEVEL
BASS Q FACTOR
BASS EXTEND
MID ADJUST MID CTR FRQ
MID LEVEL
MID Q FACTOR
TRE ADJUST TRE CTR FRQ
TRE LEVEL
.
.
Adjusts the subwoofer output level.
Adjusts the level to memorize for each source. (Before making an
adjustment, select the source you want to adjust.)
60HZ/ 80HZ/ 100HZ/ 200HZ: Selects the center frequency.
–8 to +8 (+2): Adjusts the level.
1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
ON: Turns on the extended bass. ; OFF: Cancels.
0.5KHZ/ 1.0KHZ/ 1.5KHZ/ 2.5KHZ: Selects the center frequency.
–8 to +8 (+1): Adjusts the level.
0.75/ 1.00/ 1.25: Adjusts the quality factor.
10.0KHZ/ 12.5KHZ/ 15.0KHZ/ 17.5KHZ: Selects the center
frequency.
–8 to +8 (+1): Adjusts the level.
Default: XX
15
ENGLISH