2. PAIRING AND CONNECTION
1. Turn on the BLUETOOTH mode of the mobile phone;
2. Select the item of finding the Bluetooth Device and enter it. After finishing the finding, it will show the name
of the Bluetooth Device if finding a Bluetooth Device.
Select it and enter it, then it will show a interface that ask you to input a password, input the password 0000
and then enter it. Then it will tell you pair OK.
For some mobile phones, they can automatically connect with the BT device of the car audio system after
pairing is ok; for some mobile phones, they need to select the paired BT device and press the CONNECTION
button. When connection is ok, the LCD of the car audio system will show LINK OK.
3. Use the mobile phone to do connection or disconnection
In the connection status, find the paired and connected Bluetooth Device, then press the disconnection button
to do disconnection;
In the disconnection status, find the paired and disconnected Bluetooth Device, then press the connection
button to do connection
4. In the CONNECTION STATUS: the audio of mobile phone transfers to the car audio system whenever a
dialing takes place or receiving a call.
5. Dialing when in CONNECTION STATUS:
Dial with the mobile phone directly.
Dial with remote control with the following procedures:
(1) Input telephone number with number buttons 0-9
* Press CLEAR button briefly to cancel the wrongly input number if necessary
(2) Press TEL briefly to execute the dialing.
To redial the last phone number dialed
Press REDIAL button briefly or tap
6. ACCEPT/REJECT/END CALL
When ringing, press
When ringing, press
When talking, press
Note: During ringing, the phone number appears.
TOKAI
BLUETOOTH SYSTEM
the icon to validate the last phone number.
TEL button to accept the call;
HANG UP button to reject the call
HANG UP button to end the call.
65