Seko Pool Basic Pro Evo Manuel D'installation page 14

pH measurement display (B configuration)
Progrma Menu
pH Measure
pH Measure
Setpoint
pH Measure
Sp Type
pH Measure
OFA Time
pH Measure
Alr Band
pH Measure
Type
Flocculant measurement display (B
configuration)
Progrma Menu
Flocculant
Flocculant
Tube
Flocculant
Conc
Flocculant
Pump
000013791
7.4 pH
Acid
Off
3.0pH
PROP
6x10
1.0 cc/m3
20 m3/h
Rev. 1.0
Settings
Use Enter to access the sub-menus:
 Setpoint
 Dos type
 OFA time
 Alr Band

Type
Press Enter and the + and - keys to change
the Set Point value (0÷14 pH)
Press Enter and the + and - keys to change
the Set Point type.
 Acid

Alkaline
Press Enter and the + and - keys to set the
OFA time to OFF or from 1 to 240 min. (see
Paragraph 9.5)
Press Enter and the + and - keys to set the
band alarm from 1 to 3 pH.
Press Enter and the + and - keys to change
the dosing type.
 PROP (see Paragraph 9.2).
 ON/OFF (see Paragraph 9.4).

OFF (dosing disabled)
Settings
Use Enter to access the sub-menus:
 Hose
 Conc.

Pump
Use Enter to modify the dimensions of
the hose (3x7 or 6x10mm) and the
system automatically calculates the flow
rate with the other hose without changing
any parameters (the factory-set hose is
6x10).
Enter the concentration value of the product
to be dosed with the 3x7 hose. This value
ranges from 1 to 4cc/m3. With the 6x10
hose the range is 1 to 15cc/m3.
Enter the value of the system recirculation
pump. It ranges from 2 to 100m³/h
13