Kenwood KDC-BT365U Mode D'emploi page 35

Wiring connection
(for
IMPORTANT : We recommend installing the unit with a commercially
available custom wiring harness specific for your car and leave this job
to professionals for your safety. Consult your car audio dealer.
When connecting to an external amplifier, connect its ground wire to
the car's chassis to avoid damaging the unit.
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch Car fuse box
Car fuse box
Battery
)
Rear/ front/ subwoofer output
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
Red
(Ignition wire)
Yellow
(Battery wire)
Black (Ground wire)
To the metallic body or chassis of the car
Fuse (10 A)
Expansion port (12 V 500 mA)
To the optional SiriusXM Vehicle Tuner (commercially available) ( 12)
If no connections are made, do not let the wire come out from the tab.
Light blue/yellow
(Marine remote control
wire)
Brown
(Mute control wire)
Blue/White
(Power control wire)
Blue
(Antenna control wire)
MIC (Microphone input terminal) ( 15)
To the remote control, KCA-RC55MR
(optional accessory)
To Kenwood Wired Marine Remote Control unit (optional
accessory)
For the latest information on marine accessories please go to:
http://www.kenwoodusa.com/Car_Entertainment/Marine/
To connect the Kenwood navigation system, refer your
navigations manual
To the power control terminal when using the optional power
amplifier
To the antenna control terminal in the vehicle
31
ENGLISH