Technical Data; Noise/Vibration Information - GreenWorks Tools 3802507 Manuel D'utilisation

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
PRODUCT FEATURES
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Auxiliary handle
2 SDS chuck
3 Depth stop rod
4 Mode selector
5 Direction of rotation selector
6 Switch trigger
7 Battery pack*
8 Battery unlocking button*
9 Release button for mode selector switch
10 Rod adjustment button
11 SDS bit*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our accessories
program.
DELIVERY SCOPE
Rotary hammer, auxiliary handle and depth stop.
Application tools and other accessories shown or
described are not part of the standard delivery scope.
A complete overview of accessories can be found in our
accessories program.

TECHNICAL DATA

Product name
Rated voltage
No-load speed
Impact rate
Single impact force
(EPTA)
Concrete drilling dia 18 mm
Stone Drilling dia
Steel drilling dia
Wood drilling dia
Weight (without
battery and charger)
Battery
Charger
Sound power level
Sound pressure
level
Vibration level

NOISE/VIBRATION INFORMATION

Noise and vibrational values (vector sum of three
directions) determined according to EN 60745.
English (Original Instructions)
24V SDS Hammer Drill
24V
0-1200 rpm
0~5600 bpm
1.8J
18 mm
13 mm
30 mm
2.0 kg
29807 / 29837
29817 (VDE) / 29827(BS) /
2913907 ((VDE&BS)
LwA=87.7dB(A), K=3
LpA=76.7dB(A), K=3
2
, K=1.5
12.028m/s
Typically the A-weighted sound pressure level of the
product is 76.7 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a
K determined according to EN 60745: a
2
K=1.5m/s .
The vibration level given in this information sheet has
been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool
with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or insertion tools or is poorly maintained,
the vibration emission may differ. This may significantly
increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This
may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of
work patterns.
KNOW YOUR HAMMER DRILL
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
Auxiliary Handle
Your drill is equipped with an auxiliary handle 1 for ease of
operation and to help prevent loss of control. The handle
can be mounted on the opposite side for left or right hand
use.
Depth Stop Rod
A depth stop rod 3 has been supplied with this product
to assist in controlling the depth of drilled holes. For
convenience and ease of starting threads, the hex nut
has been trapped inside the molded slot in the auxiliary
handle.
Direction Of Rotation Selector
(Forward/Reverse/Center Lock)
Your drill has a direction of rotation (forward/reverse lock)
selector 5 located above the switch trigger for changing
the direction of bit rotation. Setting the direction of rotation
selector in the OFF (center lock) position helps reduce the
possibility of accidental starting when not in use.
2
(triax vector sum) and uncertainty
h
=12.028m/s
h
2
,