Removing The Side Panels; Installing The Motherboard; Installing Hdds; Installing Ssds - Corsair CRYSTAL Série Guide D'installation

CRYSTAL SERIES 460X

1. Removing the side panels

Remove the thumb screws
and pull the side panel off.

2. Installing the motherboard

Snap your motherboard's I/O
shield into the cutout.
Align the motherboard with
the standoffs in the case.
Secure with the included
screws.
b
5

3. Installing HDDs

Step 1 – Place the drive into
the 3.5" drive tray.
Step 2 – Slide the drive
and rail assembly into the
HDD cage from behind the
motherboard as shown.
400C_400Q STEP 3

4. Installing SSDs

Slide the 2.5" drive into the
tray until it snaps into place.
400C_400Q STEP 3
Step 1
Step 2
6