Remove The Stock Blower; Install The Stock Blower - Corsair HYDRO Série HG10 Guide D'installation

HG10 – N780 Edition

2. Remove the stock blower

Now that the stock blower has been unplugged, remove the stock blower from the heatsink by unscrewing the
three screws underneath the blower. Make sure to keep the screws from the stock heatsink, we will use these
for the next step.

3. Install the stock blower

Next, route the stock fan blower cable through the HG10 bracket and secure the blower to the bracket using
the same screws from the previous step.
5