Geneva XXL Mode D'emploi page 8

Wi-Fi sEtup With Wps
What is Wps?
WPS ( W i-Fi protected setup ) is a simple way to connect a new device to a Wi-Fi network. WPS is a common feature on newer Wi-Fi access points
( w ireless routers ) . Press the "Wi-Fi Setup" button on the Model XXL and the "WPS" button on the Wi-Fi access point within about a minute, the
Model XXL will automatically connect to the Wi-Fi network.
instructions
1. Set the "Network" switch on the back panel to "Wi-Fi-only".
2. Turn on the Model XXL.
3. Press "AirPlay" on the remote control.
4. Lower the front grid.
5. Press the "Wi-Fi Setup" button below the display. The display will
show "WPS". Pressing the power button above the display cancels
this setup process.
12
6. On the Wi-Fi access point ( w ireless router) press the WPS button.
The light on the button starts to blink. If nothing happens you may
have to hold the button down for a few seconds, the Model XXL and
the Wi-Fi access point are now starting to connect to each other.
7. Wait until the Model XXL display shows "Connected to XXX" -
where XXX is the name of the connected Wi-Fi network.
Now you are ready to play music via AirPlay or DLNA.
Wi-Fi sEtup With ModEl XXl as a tEMporary Wi-Fi accEss point
8
instructions
1. Set the "Network" switch on the back panel to "Wi-Fi-only".
2. Turn the Model XXL on.
3. Push "AirPlay" on remote control, then wait 30 seconds.
4. Lower the front grid.
5. Press the "Wi-Fi Setup" button below the display two times; the
display will show "WIFI AP". ( P ressing the power button above the
display cancels this setup process. )
6. Connect to the Wi-Fi network, depending on your device and
operating system:
7. Open an Internet browser ( S afari, Windows Explorer, Chrome,
Firefox, etc. ) .
8. Enter http://192.168.1.1 to access the Network Setup webpage for
the Model XXL.
9. Select your Wi-Fi network ( S SID ) .
10. Enter the password, if needed.
11. Press "Apply". The webpage now is no longer accessible.
12. Wait until the Model XXL display shows "Connected to XXX" –
where XXX is the name of the connected Wi-Fi network.
13. Now you are ready to play music via AirPlay or DLNA.
English
9
10
11
iphone, ipad or ipod touch
®
6.1. Open "Settings", and then open "Wi-Fi".
6.2. Make sure Wi-Fi is on.
6.3. Select the network "GENEVA_XXL...". This temporary Wi-Fi
network created by the Model XXL does not require a password.
6.4. Click "Join"
android
6.1. Open "Settings", and then go to "Wireless & networks", "Wi-Fi".
6.2. Make sure Wi-Fi is on.
6.3. Select the network "GENEVA_XXL...". This temporary Wi-Fi
network created by the Model XXL does not require a password.
Mac os 10.5 or higher
6.1. Go to System Preferences, then "Network".
6.2. On the left select Wi-Fi. Make sure Wi-Fi is enabled.
6.3. Select the network "GENEVA_XXL..." in the menu "Network
Name". This temporary Wi-Fi network created by the Model XXL
does not require a password.
6.4. Click "Apply"
Windows 7
6.1. Go to the control panel, and select "Networking".
6.2. Select "Manage wireless networks".
6.3. Select the network "GENEVA_XXL...". This temporary Wi-Fi
network created by the Model XXL does not require a password.
6.4. Click "OK".
Windows 8
6.1. Go to the control panel, and select "Networking and Internet".
6.2. Select "Connect to a network".
6.3. Select the network "GENEVA_XXL...". This temporary Wi-Fi
network created by the Model XXL does not require a password.
6.4. Click "Connect".
13