Setup Menu - Panasonic AVC Intra AJ-YBX200G Mode D'emploi

Settings for the AJ-HPM100/AJ-HPM110
When recording with the AJ-HPM100 using the AVC-Intra codec, settings are adjusted in the setup
menu.
See the operation manual of the main body for instructions on how to configure the setup menu.
Recording format
1080/59.94i
AVC-Intra 100
720/59.94P
1080/59.94i
AVC-Intra 50
720/59.94P
1080/50i
AVC-Intra 100
720/50P
1080/50i
AVC-Intra 50
720/50P
<Notes>
During playback, the format is automatically identified. However, clips with a different system
frequency cannot be played.
See the operation manual of the main body for instructions on how to configure the system frequency
setup for the AJ-HPM110.

Setup menu

When this product is equipped with the AJ-HPM100/AJ-HPM110, the following setup menu becomes
available.
Item
FR No. SUPER DISP. FR No. SUPER DISP.
025 REC FMT(HD)
is the factory setting mode.
Error message
When this product is equipped with the AJ-HPM100/AJ-HPM110, the following error message is added.
Error
Number Message
E-39
CONFIG
ERROR
Instructions for use
Input and output with IEEE 1394 cannot be performed during playback and recording of the AVC-Intra.
Clips played at 23.98P or 29.97P frame rate recorded with the camera recorder are pulled down to
1080/59.94i or 720/59.94P for output. Clips played at 25P frame rate recorded with the camera
recorder are pulled down to 1080/50i or 720/50P for output. (AJ-HPM100 only)
Text memos of clips that cannot be played, such as those with a different system frequency, cannot
be displayed as thumbnails.
E-7
25: SYSTEM FREQ
59.94
50
Setting
0000 DVCPRO
0001 AVC50
0002 AVC100
Displayed when the AVC-I optional board cannot be initialized.
Because failure of the optional board is possible, contact the
store where you purchased it.
Settings of the setup menu
020: SYS FORMAT
1080i
720p
1080i
720p
1080i
720p
1080i
720p
Setting details and description of outline function
Select the recording format when menu No. 020 SYS FORMAT
is set to 1080i or 720p.
0: Select DVCPRO HD (100 Mbps).
1: Select AVC-Intra 50.
2: Select AVC-Intra 100.
Details
025: REC FMT (HD)
AVC100
AVC50
AVC100
AVC50
Operation
The AJ-HPM100/AJ-
HPM110 stops working.