Setting Menu; Error Message - Panasonic AVC Intra AJ-YBX200G Mode D'emploi

Setting AJ-HPX2000/2100
When recording with the AJ-HPX2000/2100
using the AVC-Intra codec, settings are adjusted
on the <SYSTEM MODE> screen in SYSTEM
SETTING of the setup menu.
To adjust the settings, see the operation manual
of the AJ-HPX2000/2100.
Recording format
AVC-
1080/59.94i
Intra 100
720/59.94P
AVC-
1080/59.94i
Intra 50
720/59.94P
AVC-
1080/50i
Intra 100
720/50P
AVC-
1080/50i
Intra 50
720/50P
<Notes>
When switching items in SYSTEM MODE, turn
off the power of the main body and then turn it
on again.
During playback, the format is automatically
identified. However, clips with a different
SYSTEM MODE cannot be played.

Setting menu

When this product is equipped with the AJ-
HPX2000/2100, the
becomes available.
SYSTEM MODE screen in SYSTEM SETTING
Item/
Variable
Data
range
storage
REC MODE HD mode
(1080i):
DVCPRO HD
AVC-I 50
AVC-I 100
HD mode
(720P):
DVCPRO HD
DVC HD (N)
AVC-I 50
AVC-I 100
E-5
Settings for the main
menu
SYSTEM
REC MODE
MODE
1080-59.94i AVC-I 100
720-59.94P
1080-59.94i AVC-I 50
720-59.94P
1080-50i AVC-I 100
720-50P
1080-50i AVC-I 50
720-50P
following setup
Remarks
Select the recording mode.
DVCPRO HD:
Record with the DVCPRO
HD format.
DVC HD (N):
Record in the Native
mode of DVCPRO HD.
AVC-I 50:
Record in AVC-I 50
format.
AVC-I 100:
Record in AVC-I 100
format.
DIAGNOSTIC 2 screen in MAINTENANCE
Item/
Data
storage
AVC-I SOFT
AVC-I FPGA

Error message

By Equipping this product with the AJ-HPX2000/
2100 adds the following error code display.
When an error occurs for any reason, the
following error code is displayed in the display
window.
Code No.
E-39
Instructions for use
Input and output with IEEE 1394 cannot be
performed during playback and recording of
the AVC-Intra.
Clips played at 23.98P or 29.97P frame rate
recorded with the camera recorder are pulled
down to 1080/59.94i or 720/59.94P for output.
Clips played at 25P frame rate recorded with
the camera recorder are pulled down to 1080/
50i or 720/50P for output.
menu
Text memos of clips that cannot be played,
such as those with a different SYSTEM
MODE, cannot be displayed as thumbnails.
Variable
Remarks
range
Display the control software
version of the AVC-I board
(optional).
Display the FPGA program
version of the AVC-I board
(optional).
Details
Initialization defect on the AVC-I
optional board