Storch 559000 Mode D'emploi page 20

CAUTION:
Make sure the spring button on each leg clicks out before
using the product. Failure to do so may result in the legs
retracting during use.
Workbench mode
Workbench mode to work platform mode
1. Press in the spring button on each leg and slide the
leg in.
2. Open the four latches on the sides (two latches per
side).
Original instruction
3. Remove the panel, turn it over so that the anti-slip
work plarform surface is face up, and place it back onto
the platform. Re-fasten all four latches.
Workplatform mode
20