To Prevent Damage - Philips Lumea SC1994 Mode D'emploi

Note: If you notice a skin tone has changed since the last treatment
(e.g. due to tanning), we recommend that you perform a skin test and
to wait 30 minutes before your next treatment.

To prevent damage

- Make sure that nothing obstructs the airflow through the
ventilation slots of the device.
- Never subject the device to heavy shocks and do not shake or
drop it.
- If you take the device from a very cold environment to a very warm
environment or vice versa, wait approximately 3 hours before you
use it.
- Store the device in a dust free and dry place.
- Do not use the device at a temperatures lower than 15 °C or higher
than 35 °C.
- Store the device in temperatures between -25 °C to 60 °C to avoid
reduced device lifetime.
- In order to prevent damage avoid unnecessary prolonged
exposure to direct sunlight or other UV light.
Caution
- This device is only intended for removing unwanted body hair from
areas below the cheekbone. Do not use it for any other
purpose. Doing so may expose you to a hazardous situation. Men
must not use it on the face and neck including all beard-growing
areas and the whole genital area.
- This device is not washable. Never immerse the device in water
and do not rinse it under the tap.
11
English