Samsung WA54M8750A Manuel Utilisateur page 61

No Code
5 5C
6 9C1
7 9C2
8 AC6
9 dC
10 HC
WA8700M_WA54M8750A_DC68-03774B-02_EN.indd 61
Water is not draining.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is positioned correctly, depending
on the connection type.
• Clean the mesh debris filter as it may be clogged.
• Make sure the drain hose is straight all the way to the drain
system.
• Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact
a Samsung customer service center.
The electronic control needs to be checked (Over Voltage Error).
• Check if power is supplied properly.
• Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact
a Samsung customer service center.
Low voltage detected.
• Check if the power cord is plugged in.
• Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact
a Samsung customer service center.
Inverter Communication problem.
• Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact
a Samsung customer service center.
Operating the washer with the door open.
• Make sure the door is properly closed.
• Make sure laundry is not caught in the door.
High temperature heating check.
• Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact
a Samsung customer service center.
Meaning
English 61
2017-04-18 9:59:53