Samsung WA54M8750A Manuel Utilisateur page 57

Problem
Vibrates excessively or
makes noise.
Stops.
WA8700M_WA54M8750A_DC68-03774B-02_EN.indd 57
• Make sure the washing machine is on a level floor. If the floor is
not level, use the levelling feet to adjust the washing machine.
• Make sure the washing machine is not contacting any other object.
• Make sure the laundry load is balanced.
• Make sure the laundry is spread evenly in the washing machine.
Spread out the laundry evenly and start again.
• Make sure the space around the washing machine is free of
objects.
• Humming is produced normally during operation.
• Objects such as coins can cause noise. Remove these objects from
the washing machine after washing is complete.
• Plug the power cord into a live electrical outlet.
• Check the fuse or reset the circuit breaker.
• Close the door, and then press or tap START/PAUSE to start the
washing machine. For your safety, the washing machine will not
spin unless the door is closed.
• Before the washing machine starts to fill, it will make a series of
clicking noises to check the door lock, and then does a quick drain.
• There may be a pause or soak period in the cycle. Wait briefly and
the washing machine may start.
• Make sure the inlet hose filters at the taps are not clogged.
Periodically clean the filters. See page 53.
• This problem can occur temporarily due to low voltage in your
household electrical system. It will be resolved when the voltage
returns to normal.
Action
English 57
2017-04-18 9:59:53