Cleaning, Maintenance And Ordering Of Spare Parts; Ordering Replacement Parts; Disposal And Recycling; Storage And Transport - EINHELL GE-HM 38 S-F Instructions D'origine

7. Cleaning, maintenance and
ordering of spare parts
7.1 Cleaning
•
Clean the machine with a brush or rag after
each use.
•
Store the equipment in a location that is dry
and not accessible by children. For storage in
less space you can remove the grass basket
and move the push bar into a vertically up-
right position (Fig. 9).
•
Keeping your lawn mower in good condition
not only ensures a long lifespan and high per-
formance, but also enables the equipment to
thoroughly cut your grass with minimal effort.
7.2 Maintenance
•
Ensure that all mounting components (i.e.
screws, bolts, nuts etc.) are always tightened
so that the mower can be safely operated at
all times.
•
Replace excessively worn or damaged parts
immediately.
•
In order to ensure that you enjoy the equip-
ment for many years to come, all screwed
parts, as well as the wheels and axles, should
be cleaned and lubricated.
•
The blade on the mower spindle is subject to
more wear and tear than any other compo-
nent of the unit. Check the condition of the
blade on the mowing spindle at regular inter-
vals and make sure that it is tightly fastened.
•
If the blades on the mower spindle become
blunt and need replacing, please contact our
customer service. Use only genuine spare
parts.
7.2.1 Setting the counter blade (Fig. 8)
Warning! Wear safety gloves.
The counter blade (H) is pre-set at the factory.
Re-adjustment might be required after prolonged
use.
•
If the counter blade is too loose, the cut will
look rough and uneven.
•
If the counter blade is too tight, the mower will
be noisy and hard to push.
Anl_GE_HM_38_S_F_SPK7.indb 17 Anl_GE_HM_38_S_F_SPK7.indb 17
GB
The Allen screws (G) on both sides of the mower
must be adjusted evenly such that the counter
blade (H) and the mower spindle (2) touch wit-
hout making hardly a sound.
•
Turn the Allen screw (G) clockwise = The
counter blade will move closer to the mower
spindle
•
Turn the Allen screw (G) counter-clockwise
= The counter blade will move further away
from the mower spindle
The counter blade (H) is correctly adjusted if a
piece of paper placed between the blades on the
mowing spindle (2) and the counter blade will be
cut along its full length when you turn one of the
wheels forwards by hand without force.

7.3 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info

8. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.

9. Storage and transport

Storage
Store the equipment and accessories out of
children's reach in a dark and dry place at above
freezing temperature. The ideal storage tempera-
ture is between 5 and 30 °C. Store the machine in
its original packaging.
- 17 -
22.04.15 08:37 22.04.15 08:37