Nordelettronica NE100 Instructions D'emploi page 10

DISTRIBUTION PANNEL NE100
Fig. 3
LEGEND
F1: 10A fuse connected directly to the service battery to power heaters/boilers and ignite gas (cooker,
refrigerator, etc.).
F2: 10A fuse connected to the pump switch to power water pumps.
F3: 10A fuse connected directly to the service battery to power electric step.
F4: 20A fuse to power fridges.
F5: 15A fuse connected to the master light switch to power light group _1 and external light.
F6: 15A fuse connected to the master light switch to power light group _2.
OPERATION
Services activated from the control panel
The outputs for internal light (lights_1 and lights_2), external light and pump are activated directly by the
relevant keys on the control panel.
- The internal light switch also operates as a master switch for external light.
- The external light goes out automatically when the engine is running.
- If the voltage for the service battery goes below 10V for more than one minute, the NE100 distribution
panel automatically turns off all power to the lights and pump.
Services activated by D+
The coupling relay and the three-way fridge relay are enabled directly by the D+ signal (or engine ignition
key). The coupling relay recharges the service battery through the alternator with the engine running. The
fridge relay powers the three-way fridge at 12V, with the engine running.
- Both relays are excited when the ignition battery exceeds 13.4V and automatically de-excite when the
engine is turned off or the battery ignition voltage is below 12.5V.
Dimensions:
Only box to wall: (L x H) 183 x 98 mm
Container vertical suit: (L x H x P) 215 x 102 x 186 mm