Elinchrom ELB 500 TTL UNIT Manuel D'utilisation page 5

ELB 500 TTL CHARACTERISTICS
The ELB 500 TTL unit implements manual, action and TTL modes.
The TTL (Through the Lens Metering) mode allows you to access
fully automatic exposure setups according to your digital camera
capabilities.
If you wish to work in the manual mode or combine both modes,
the unit enables you to save the TTL exposure parameters as a
starting point when passing to the manual mode.
The unit supports Skyport radio remote control and HSS at full
power. It offers totally flexible asymmetry and the fastest flash
durations at lower power levels.
The ELB 500 TTL unit has the following characteristics:
• 500 Ws maximum output power in manual and TTL modes
• Full asymmetry with two outlets A & B
• 7 f-stops power range
• Action mode for optimised flash duration
• Dedicated ELB 500 Head
• LED modelling lamp power in 40 adjustment levels
• New ergonomic design with large OLED colour display
• Accepts two remote options: Elinchrom PRO and Odin2.
Earlier Skyport versions are supported (HSS and TTL is
supported on the Transmitter PRO with a firmware update)
• Improved weather protection for outlets
• USB socket for firmware updates and Sync socket 3.5 mm
• Complete unit only 2.49 kg / pack alone 1.7 kg / Battery Box
0.73 kg
EN
5