Elinchrom ELB 500 TTL UNIT Manuel D'utilisation page 16

One head view
LED MODELLING LAMP
EN
Modelling lamp settings are accessible through a dedicated
Modelling Lamp button (5).
CONTROLLING THE LED / MOD LAMP MENU ACCESS
• A short press on the modelling lamp button turns on the LED
lamp of the ELB 500 Head.
• A long press on the modelling lamp button opens the
modelling lamp setup menu and switches on the modelling
lamp.
USE OF THE A AND B BUTTONS
• To enter into the modelling lamp menu, press and hold the
modelling lamp button.
• To enable / disable the LED of the A or B outlet, use a long
press on the A / B buttons.
• To select the A or B outlet LED, use a short press on the A /
B buttons, and turn the scroll button for individual LED power
settings.
16
Two head view