Beamz professional LED MULTIGOBO DMX 30W Notice D'utilisation page 9

Technical specification
Consumption 50W
DMX channels 5
No. of LEDs 1x 30W
Power Supply 220-240Vac / 50Hz
Dimensions 335 x 270 x 215mm
Weight 2.4kg
The LED MultiGobo can be operated by DMX control or can be used as an individual unit without controller.
It can be linked together in master/slave mode, and perform a great built-in programmed lighting show or it can be
triggered by music.
Control
A. Master/Slave operation
B. Easy sound active and Auto mode
C. Universal DMX controller
In Master/Slave mode refer to the DMX settings below:
Master unit: when working at Auto-run or Sound Control mode operation
Slave units: DMX start address MUST be set to d001.
DMX Settings
CH1
CH2
CH3
CH4
CH5
LED Dimmer（0~255）
Flash （0~255）
Motor Gobo（0~255）
Motor mirror （0~255）
Auto DMX（11~200）
Sound DMX （201~255）