Pump Storage; Probe Storage; Advices On The Chemicals; Suggested Chemicals - aqua litepool ph Manuel D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1

5.3 Pump storage

When you want to store the pump (in winter for example) you have to protect the peristaltic hose. It
is recommended to dose clean water to avoid the chemical attack of the hose when the pump is
stored. Rotate the roller holder in clockwise sense to move the pump to the position of the
photograph above in fact it is recommended to not leave pressed the hose near the suction part

5.4 Probe storage

When the swimming pool is closed for long period (for example during the winter) the probe must
be retired from the installation and stored with the cap on. The cap must be filled for 1/2 of clean
water (see page 6).

6.0 Advices on the chemicals

6.1 Suggested chemicals

Use the most sold pH acid chemicals to decrease the pH ( see installer/distributor suggestions).
Use the most sold pH alkaline chemicals to increase the pH (see installer/distributor suggestions).

6.2 Not suggested chemicals

Chlordric acid it is not recommended because it easily damages the pump. If anyway you want to
use it we suggest to add 5 volumes of water for 1 volume of acid chloridric.

7.0 WARRANTY CERTIFICATE

The pumps manufactured by AQUA S.p.A. are warranted to be free from defects in work manship
and material for 24 months of operation starting from the delivery date to the first purchaser.
Within the above stated period AQUA S.p.A. will supply free of charge any part that upon
examination by AQUA S.p.A. or by an authorised dealer, is disclosed to have been defective in
work manship or material, or at its option, it will repair the parts directly or through authorised
workshops. It remains anyway excluded from whatever responsibility and obligation for others
costs, damages and direct or indirect losses that come from the use or the not use availability,
either total or partial. from this guarantee are excluded all components subject to normal wear and
tear, such as valves, gaskets, fittings, ring nuts, tubes, filters, valve injection, probes, electrodes
and components in glass.
The reparation or the supply in substitution will neither extend nor renew the period of guarantee.
They remain anyway at charge of the purchaser the costs of plant pumps mounting and
disassembling, transport cost and using materials (filters, valves, and so on). AQUA S.p.A.'s
duties, as above, are not valid when:
- The pumps are not used according to the AQUA S.p.A. instructions as in the operating manual
and maintenance instructions;
- The pumps are repaired, disassembled, modified by workshop not authorised from AQUA S.p.A.;
- They have used not original AQUA S.p.A. spare parts
- The injection plans are damaged buy products that are not suitable;
- The electric plants have been damaged because of external causes such as whatever type of
over tensions.
At the end of the 24th month from the delivery date, AQUA S.p.A. will be free from any liability and
from all the duties as above.
25/07/2008
19

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières