Safety Precautions - B.A. International ULTRASONIC CLEANING UNIT Mode D'emploi

Before using your Ultrasonic Cleaner, please read and thoroughly understand these safety
precautions. Failure to comply with these warnings and safety precautions may result in
serious personal injury or property damage.
To avoid electrical shock:

Unplug your machine from the power source before filling or emptying the tank.

Keep the area around the ultrasonic cleaning machine clean and dry. Water and
high voltage can cause electric shock.

Ensure that the ultrasonic cleaning machine is properly grounded/earthed. Do
not remove the grounding prong/earth pins on the line cord plug.

Do not immerse your ultrasonic cleaning machine in water.

Do not disassemble your ultrasonic cleaning machine –hazardous voltages
inside the tank are dangerous.

Warning: Do not ever use alcohol, gasoline or flammable solutions. Doing so
could cause a fire or explosion.

Warning: Unplug the machine before moving it.

Warning: Do not immerse the ultrasonic cleaning machine in water or any other
liquid. To maintain the tank free of sediment and soap scum: Unplug, Rinse and
Wipe Dry.

Do not use mineral acids or bleach. These liquid concentrates can damage the
ultrasonic cleaning tank.

Use only approved ultrasonic cleaning solutions for compatibility. CHANGE THE
ULTRASONIC CLEANING SOLUTION DAILY OR AS NEEDED.

Do not allow the solution to drop below the operating level of the tank while the
ultrasonic cleaning machine is in operation.

Never run the ultrasonic cleaning machine at solution temperatures over 160˚F.

Do not place parts or containers directly on the bottom of the ultrasonic cleaning
tank.

When using beakers or an auxiliary pan, enough solution must be in the tank to
act as a coupling agent. The beakers should be suspended below the solution
level, but above the bottom of the tank.

Do not leave the instruments in the ultrasonic cleaning machine overnight; it may
cause corrosion (to the instruments). All instruments must be rinsed and dried
before using.

Avoid operating the ultrasonic cleaning machine in extremely dusty areas.

Keep the ventilating louvers/louvres clean and free of obstructions.

Do not disassemble your machine. Contact your local Distribution Center/Centre.
FAILURE TO COMPLY WITH THESE WARNINGS AND PRECAUTIONS WILL
VOID YOUR WARRANTY.
Safety Precautions and Warnings
CAUTIONS:
3