B.A. International ULTRASONIC CLEANING UNIT Mode D'emploi page 13

Indirect Method
When a cleaning application necessitates a series of different solutions, or
when a specialized/specialised solution which is not to be placed directly
into the tank is to be used, the following procedure is recommended.
POSITIONING
COVER
SOLUTION
LEVEL
Fill
approximately
2/3
appropriate solution or carrier bath.
Fill auxiliary pan or beaker (s) with an
appropriate cleaning solution(s) to a
JUST ABOVE
level just above the item(s) to be
ITEM
cleaned.
Place auxiliary pan into main tank,
resting it on its handles, making sure
that the bottom of the auxiliary pan is
SOLUTION LEVEL
below the solution level in the main
tank, add water if necessary. This
insures
transference.
BEAKER
BAND If a beaker or beakers are used,
BEAKER
place the beaker in a positioning
cover using the beaker band to adjust
the depth of the suspension so that
the beaker bottom is slightly below
the surface of the solution in the main
tank, but off the bottom
13
the stainless
⅔ full
proper sound
steel tank
with an
wave
.