Introduction; Explanation Of Symbols - TOOLCRAFT TC-AHR 9 Notice D'emploi

1. Introduction

Dear customer,
Thank you for purchasing this product.
This product complies with statutory national and European regulations.
For safety reasons, always follow the instructions in this manual.
These operating instructions are part of this product. They contain important information on setting up and
using the product. Never give the product to a third party without these instructions, and keep them in a
safe place for reference.
If there are any technical questions, please contact:
International: www.conrad.com/contact
United Kingdom: www.conrad-electronic.co.uk/contact

2. Explanation of symbols

The symbol with the lightning in the triangle is used if there is a risk to your health, e.g. due to an electric
shock.
This symbol is used to highlight important information in these operating instructions. Always read this
information carefully.
This symbol indicates special information and advice on how to use the product.
The product must only be installed and used in dry, indoor locations. It must not become damp or wet, as
this may result in a fatal electric shock!
This symbol reminds you to read the operating instructions included with the product.
13