Steelcase TNT Série Notice De Montage page 69

Table des Matières

Publicité

Touch Down
Assembly and operation
3.
4
.
Turn column base over.
Loosen screws on table top understructure. To
do so, lift wings and turn screw to the left. Now
the table understructure can be opened.
5
5
.
.1
Position table top with understructure on the column.
Screw understructure to the column with M6 x 30
screws and 12mm diameter washers.
Use 5mm Allen wrench for this purpose.
page2

Publicité

Table des Matières
loading

Table des Matières