Bushnell NatureView HD CAN Mode D'emploi page 30

the Viewer, slide it all the way back to the right and lift it up and out away
from the camera.
The Viewer will normally display the live image from the lens when the camera
is in SETUP mode. If you press the MENU key on the control panel, the
Viewer will switch to displaying the settings/options for the Setup Menu (in
fact, you can see all possible settings for each parameter).
On the remote color viewer, all the available settings for the currently
displayed parameter are shown on one screen, with a checkmark next
to the current setting (a). To change the setting, first use the UP/
DOWN keys to highlight (select) the new setting you want (b), then
press OK to "Execute" the actual change to the selected setting.
The checkmark will appear next to your new setting to confirm this
(c).
To use the connected Viewer to review photos/videos on the
SD card:
Press the Replay (OK) key.
• Press the UP/DOWN arrow keys to select the previous or next image.
Photos are indicated on the display by "JPG".
• Press the Left arrow key to zoom in on an image (then use UP/DOWN
to zoom in/out).
• Press OK to move around the image with the UP/DOWN and LEFT/
RIGHT keys. Press OK again to exit and return to the normal image
review.
• Press the Menu key to Delete the current image (or all images if you
select that option). Press Menu again to cancel without deleting.
• To replay a video, after pressing the Replay (OK) key, press the RIGHT
arrow key.
30
(a) (b) (c)