Filling Procedure - Milky FJ 50 PF Notice D'utilisation

Filling procedure:

• Connect the tap water connection to inlet hose
• Connect hot water outlet connection to nearest siphon with flexible plastic hose ¾''
• Choose to fill water at microcontroller
When electronics is energized it first checks if
heating water is present.
It offers to fill the water by pressing up key
or skip the choice by pressing down key.
IF NO WATER IS PRESENT IT WILL NOT ALLOW TO PROCEED.
Menu with water filling choice will disappear in 5 seconds after start if device is already filled
with water. Water will flow through the device and exit at connection "hot water outlet".
Then stop the filling by pressing down key.
32