Table des Matières
Publicité
FOR QUESTIONS CONCERNING THE ELECTRIC MOTOR, THE ATTACHED ELECTRIC MOTOR
We strongly recommend that you read this manual carefully before installing the
An explosive atmosphere represents a serious health risk - strict attention should be
paid to the implementation of all risk prevention measures.
This manual contains the information necessary for the transport, movement, storage, installation, use and
maintenance of both direct coupling and transmission centrifugal and axial fans.
machine, you should read this service manual carefully and pay strict attention to the information and
recommendations contained within it. Keep this manual to hand for future use and reference. The manual
includes the EU certificate of conformity for the machine. For questions related to the use, maintenance and
safety precautions of the electric motor, the attached electric motor service manual should be consulted.
SOLER & PALAU, S.A. The manufacturer accepts no responsibility for breakages, accidents or any
inconvenience caused by failure to comply with the advice and recommendations contained in this service
manual.
The fans referred to in this service manual have been manufactured in compliance with rigorous quality
control and production norms such as the ISO 9001.
TRANSPORT
When transporting the machines, we recommend that:
The electric fans are protected from atmospheric agents.
-
The fan should be protected from any bump or impact which could damage it.
-
The fan should be fixed to a support frame or similar.
-
MOVING THE MACHINE
The fans should be raised by using the lifting points or hooks (if available on the model). The fans should
only be moved by means of apparatus with sufficient capacity for the weight of the fans.
Special attention should be paid when lifting the machine as the fan may tilt forwards or backwards.
STORAGE
We recommend that the fans are installed immediately after delivery.
If this is not possible, they should be stored in a dry, controlled environment, to prevent damage from dust
and corrosion. We recommend that the inflow and outflow points are closed to avoid foreign bodies entering
the machine. Before starting the machine, check all moving parts to ensure that there is free movement.
INTRODUCTION
SERVICE MANUAL SHOULD BE CONSULTED.
machine.
PRELIMINARY COMMENTS
Before installing the
Publicité
Table des Matières
