Télécharger Imprimer la page

Intended Use; Included In Delivery - Weller WXMT Mode D'emploi

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
WXMP/WXMT
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
− Coat the tips in solder before placing the soldering / desoldering
tool in the safety rest.
− Apply the solder directly to the soldering area, not to the
soldering/ desoldering tips.
− Do not apply excessive force to the soldering/desoldering tips.
− Always make sure that the soldering irons or the desoldering
tweezers are seated properly in the safety rest.
2.2

Intended use

Use the WXMP soldering iron or WXMT desoldering tweezers only
for the purpose indicated in the operating instructions of releasing,
accommodating and setting down chip components under the
conditions specified here. Intended use of the WXMP soldering iron
or WXMT desoldering tweezers also includes that you
− adhere to these instructions,
− observe all other accompanying documents,
− comply with national accident prevention guidelines applicable at
the place of use.
The manufacturer will not be liable for unauthorised modifications to
the device.

3 Included in delivery

WXMP soldering iron handpiece (packed)
− Handpiece WXMP with cable
− Operating instructions of WXMP/WXMT
− Safety information booklet
Also included with WXMP soldering iron set
− WDH 50 safety rest
− RT 3 chisel tip 40 W
− Operating instructions of WDC 2
WXMT desoldering tweezers handpiece (packed) T0051317799:
− Handpiece WXMT with cable
− Operating instructions of WXMP/WXMT
− Safety information booklet
Also included with WXMT desoldering set
− WDH 60 safety rest
− RTW 2 soldering tip pair 0.7 x 0.4 mm, 45°,
− Operating instructions of WDC 2
5-10
T0052920399:
T0058765706
T0052920499:
T0051515699
T0054460399
T0058765707
T0051317899:
T0051516999
T0054465299

Publicité

loading