Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NOTE:
If you press both buttons at the same time, the motor will not switch on.
Whilst not in use
If the unit is not used for long periods of time, remove the batteries to avoid "leakage" of
battery acid.
CAUTION:
•
Do not immerse the balance appliance in water: the electronic components can be
damaged.
•
Do not use a wire brush or any abrasive items.
•
Do not use any acidic or abrasive detergents.
1. Clean the device with a slightly moist cloth. Make sure that no humidity or waters seeps
into the device!
2. Dry the device well after cleaning with a dry and soft cloth.
Unit does not work
Possible cause:
GB
The body of the mill is assembled incorrectly.
Action:
Check that the body is assembled correctly:
•
The "S" button must lie directly above the white grinding mechanism.
•
The body must have audibly locked into place.
Possible cause:
The batteries are spent.
Action:
Change the batteries. Use 6 new MICRO/AAA/R03 type batteries.
Blocked grinding mechanism
1. Turn the wing nuts anti-clockwise.
2. If necessary, trigger the grinding mechanism by quickly pressing the respective button.
40
Cleaning
Troubleshooting
Publicité
Table des Matières
