Metabo HPT UC 36YSL Instructions De Sécurité Et Mode D'emploi page 10

English
3. Charging
When inserting a battery or back pack power supply in the charger, the charge indicator
lamp will light up continuously in blue.
When the battery or back pack power supply becomes fully recharged, the charge
indicator lamp will light up continuously in green. (See Table 2)
(1) Charge indicator lamp indication
The indications of the charge indicator lamp will be as shown in Table 2, according to the
condition of the charger, rechargeable battery or back pack power supply.
Before
charging
While
charging
Charging
Charge
complete
indicator
lamp
(RED /
BLUE /
Overheat
GREEN /
standby
PURPLE)
Charging
impossible
NOTE:
When standby for cooling battery, UC36YSL cools the overheated battery by cooling fan.
(2) About the Battery Capacity Lamp
<Charging the Battery>
The charge capacity of a battery that is charging can be checked using the battery
capacity indicator lamp. The lamp's indications for the battery capacity are as shown in
Table 3.
10
Table 2
Indications of the charge indicator lamp
Lights for 0.5 seconds. Does
Blinks not light for 0.5 seconds.
(RED) (off for 0.5 seconds)
Lights Lights continuously
(BLUE)
Lights continuously
Lights
(GREEN) (Continuous buzzer sound:
about 6 seconds)
Lights for 0.3 seconds. Does
Blinks not light for 0.3 seconds.
(RED) (off for 0.3 seconds)
Lights for 0.1 seconds. Does
not light for 0.1 seconds.
Flickers (off for 0.1 seconds)
(PURPLE)
(Intermittent buzzer sound:
about 2 seconds)
Plugged into power
source
Battery or back
pack power supply
overheated. Unable to
charge. (Charging will
commence when battery
or back pack power
supply cools)
Malfunction in the battery
or back pack power
supply or the charger