Connecting The High-Pressure Hose - Makita HW1200 Manuel D'instruction

Connecting the high-pressure hose

For the HW1200 only
Connect the high-pressure hose to the outlet (with the
gun marking). Turn the nut on the high-pressure hose
clockwise while screwing it onto the screw thread of the
outlet.
1
► 1. Outlet 2. Nut
CAUTION:
Make sure that the high-pressure
hose is securely connected. A loose connection
may blow the high-pressure hose off, resulting in a
personal injury.
Attaching the trigger gun
Connect the high-pressure hose to the inlet on the
trigger gun. Turn the nut on the high-pressure hose
clockwise while screwing it onto the screw thread on
the inlet.
1
► 1. Inlet 2. Nut
CAUTION:
Make sure that the high-pressure
hose is securely connected. A loose connection
may blow the high-pressure hose off, resulting in a
personal injury.
2
2
Connecting to a faucet
CAUTION:
Always use a pressure-resistant
water hose with ø13 mm or larger diameter and
connect to the faucet using a proper fittings.
Otherwise, the water hose and/or the fitting may
break and cause personal injury.
NOTICE:
Use a pressure-resistant water hose as
short as possible. The amount of intake water should
be higher than the max feed volume of the pump.
NOTICE:
If you connect to the mains for drink-
ing water, use a backflow preventer valve which
meets the regulations in your region.
Prepare a pressure-resistant water hose. Attach the coupling sleeve
to one end and connect the other end to the faucet as follows.
1. Remove the nut on the coupling sleeve and pass the
pressure-resistant water hose through the nut. Insert the end
of the hose into the coupling sleeve and then tighten the nut.
1
2
► 1. Pressure-resistant water hose 2. Nut of the cou-
pling sleeve 3. Coupling sleeve
NOTE: If you connect the pressure-resistant water
hose to the faucet using a coupling sleeve, attach it to
the both ends of the hose.
2.
Connect the pressure-resistant water hose to the
faucet. Apply a suitable fitting such as hose band or
water tap joint to secure the hose end with the faucet.
1
► 1. Hose band 2. Water tap joint 3. Pressure-
resistant water hose
NOTE: The fitting depends on the shape of the faucet
to which you connect. Prepare a suitable commercial-
ly-bought fitting.
7 ENGLISH
3
2
3