DNT HSQ2010 Mode D'emploi page 43

Make a test recording to make sure that the HSQ2010
Recorder settings are correct.
Press and hold
ning recording time.
Press
The maximum number of fi les in each folder is 400, for a
total capacity of 2,000 fi les (400 fi les x 4 folders, 400 fi les
x 1 hidden folder).
If the recording time exceeds the available capacity or the
number of fi les reaches 2,000, recording stops and FULL
is displayed.
Delete a few recordings or move them to a computer.
Do not remove the batteries during recording. This may
cause the recorder to malfunction.
If recording for a prolonged period of time, replace the bat-
teries before beginning.
The HSQ2010 Recorder can record while powered through
an USB cable without draining the battery. Connect the
recorder to a computer using the USB cable and press the
button for 1 second or longer to start recording.
Record with an external microphone
To record with an external microphone, connect the microphone
to the microphone jack and follow the same procedure as for the
built-in microphone.
during recording to display the remai-
during recording to create a new fi le.
- 43 -
Record